The production of hot oil boiler

oil boiler is one of the most important equipment we use in various industries; In fact, this boiler is a type of heating system that the oil is used as a heat transfer fluid; Also, these boilers also help the optimal performance in industrial processes by providing the right conditions for oil production and maintenance, using these tanks to deliver the temperature of a fluid to the high -weld point or keeping it warm.

Hot oil boiler components

The main parts of the hot oil boiler are essentially a boiler, spiral tubes, oil and coil coil; The procedure to apply these components to each other is that the oil flows into the spiral coil using the pump. Then, with the help of the burner, the oil is heated in the pipes. The hot boiler, of course, consists of other components:

1. $@@|%Thermal coils

2. doors and bases

3. Pump

4. sensors

5. %Temperature and Pressure Markets $@|

6. Thermostat

7. Oil Save

8. %Line Filling Pump

9. %Panel & Command Circuit

10. 100 Valves and Fittings Control Equipment $@|

Location

Hot oil boiler in places that are not connected to the gas network is a popular heating system. Also, heating and lubricating heavy petroleum in tanks, indirect heating of huge industrial baking furnaces and manufacturing heating for printing stages in large prints and employing in industrial dryers are among the use of hot oil boiler. Note that in industrial processes that require high temperatures, steam or hot water can also. Used as a heat transmitter to reach this temperature, but since the initial costs of installing heat transfer systems are high, the maintenance costs of these facilities are also high. The risk of explosion also increases. Therefore, the use of thermal oils as fluid can not only solve these problems

Inspection of hot oil boiler

Hot oil boiler inspection is one of the most important steps in maintaining the safety and optimal performance of this industrial equipment. Hot oil boilers require special care and attention due to its high operating temperature and existing pressure. Periodic and precise inspections prevent serious problems and possible damage and extend the life of the pot.

Why is hot oil boiler inspection important?

Safety: Inspecting timely inspection prevents accidents such as oil leakage, explosion or fire. Increased Longness: Identifying and resolving problems in the early stages, preventing serious damage to parts and extending the useful life of the pot. Reduce repair costs: preventive repairs are much more affordable than emergency repairs. Improvement improvement: Careful inspection ensures the proper functioning of all boiler components and increases thermal efficiency. Adaptation to Standards: Periodic inspections guarantee the boiler compliance with environmental and environmental standards.

When to inspect hot oil boiler?

Initial Inspection: after the installation and launch of the pot Periodic Inspection: Based on the manufacturer's instructions and standards, usually every one to two years Inspection after basic repairs: after any basic repair on the pot Emergency Inspection: If you see any abnormal signs such as oil leakage, reduced pressure, increased temperature

Hot oil boiler

Hot oil boilers are divided into two general categories in terms of how installation and overall structure as well as the type of fuel consumed:

Horizontal or vertical hot oil boiler:

Hot oil boilers are manufactured in both horizontal or vertical form according to the capacity and design specifications, both of which have their own disadvantages and benefits. Vertical boilers are usually used more in low capacity or due to space constraints. Also horizontal boilers usually have higher efficiency.

Bouiler Hot Gas Boulevard, Double Burner:

Hot oil boilers based on fuel available at the installation site, along with one of the gas burner, gasoline burner, dual -fuel burner (gas and diesel) or triple burner (gas, gas and gas); Produced.